ProSledge Weight Vest Review

The ProSledge weight vest is a modular vest that can get heavy AF!

It comes with 34 weighted blocks (ingots) that allow me to load the vest up to 106 lbs.

With all those blocks, this vest is perfect for beginners and for any seasoned athlete.

Let’s check it out!

Unboxing

I received the vest and weights in 3 boxes.

One box had the weight vest and the other two boxes had the weight blocks bubble wrapped.

I went for the full vest which includes the top half and a bottom add-on for a total weight capacity of up to 106 lbs which is heavy for a weight vest.

This is what the back looks like and it’s all pockets.

Since I have the full vest, the bottom half connects to the top half via a zipper.

Here’s view of the top where it has a handle over each shoulder.

Other vests I’ve reviewed have adjustable straps on the shoulders but this one doesn’t.

I’ve noticed that adjustable shoulder straps don’t make a difference if I load the front and back evenly.

Here are the 34 weight blocks that ProSledge calls ingots.

The blocks are unique to this vest since most use flat plates, round weight plates, or sandbags.

I like the small weight increments because exercises like pull ups and dips can be hard with big weight jumps so this allows me to progressively overload without sacrificing form.

Specs

• Weight capacity: Up to 106 lbs with the full vest (half vest goes up to 48 lbs)

• Material: 600D polyester and breathable fabric

• Padding: Shoulder and back padding with reinforced stitching make it resistant to tears

• Zippers: Heavy duty zippers

• Ingots: Comes with 34, 3 lbs ingots (weighted blocks)

Top Benefits Of The ProSledge Weight Vest

Modular Weight Vest

I like that the vest comes with multiple pockets so I can add or take off weight.

This way I can continue to get stronger just like when working out with weights.

Micro Loading

Because I can go up in weight by 3 lbs, this makes is perfect to micro load so I can gradually increase the weight as I get stronger.

It’s a similar concept used with fractional weight plates on dumbbells or barbells.

Each weight block fits snug inside a pouch and stays in place with a velcro flap.

Sometimes the weight blocks can be difficult to slide in and out because the pockets are meant to be tight to keep the blocks from bouncing around.

Just something to be aware of as it can get annoying but it’s better for them to be tight than to have multiple weight blocks shifting.

Best Features Of The ProSledge Weight Vest

Mid Chest Zipper

This is a feature I haven’t seen in other weight vests but I think it’s a great design.

The majority of vests are put on overhead like a shirt which can be uncomfortable when you load up the vest with a lot of weight.

This makes it easier cause it’s like an actual vest where I put it on one arm at a time.

Once I have both arms in, I just zip up the middle and I’m done.

I like this design better than the alternative.

Velcro Pockets

I add weight to the vest by inserting weight blocks into pockets.

The pockets are snug and stay shut with a velcro flap.

Some pockets are more snug than others and that can make it difficult to insert or remove blocks.

Here’s what the blocks look like when they’re inside a pouch.

You just see the tip of the block when the flap is lifted.

Thick Padding

There’s a thick U-shaped pad that is sewn to the inside of the pad and sits on top of my shoulders and my neck.

It provides enough cushion where I don’t feel any discomfort when I load up the vest.

Here’s what the shoulder pad looks like when I open up the vest inside out.

Adjustable Side Straps

The side straps use an adjustable plastic buckle so I can make the vest tight or loose around my rib cage.

You see two straps on my vest since I have the full vest but if you go with the half vest you’ll only have one strap on each side.

Here’s what that the strap looks like when I’m using the half vest.

According to the ProSled website, the vest is made to fit most adults.

I have it set at the tightest setting and it fits well with some bouncing when I’m running or jumping.

ProSledge Vest Pros & Cons

Pros

• Material: Made of 600D fabric that’s tough so it is durable

• Heavy: I can load the vest up to 106 lbs

• Modular: I can adjust the weight vest by adding or removing weight blocks so anyone from beginners to advanced lifters can use it and grow with it

• Zipper: Having a zipper in the middle of the vest makes it easier to put it on and take it off

• Padding: Thick padding below the shoulder straps makes it comfortable

• Spacious: Arm holes are big so they don’t restrict my arm movements when doing any upper body exercise

Cons

• Tight pockets: Weight blocks can sometimes get stuck because they fit tightly in the pockets.

• Bounce: The vest can bounce up and down slightly. I notice this more during runs or plyometrics which is common with most weight vests.

ProSledge Weight Vest Price

The ProSledge weight vest retails for $289 for the half vest (48 lbs max) and $325 for the full vest (106 lbs max).

For the most part, I think the half vest will be plenty for the majority of people.

If you’re a high level athlete then the full vest may be a good option for you.

ProSledge Weight Vest Discount Code

As usual, I’m always looking for ways to hook you up so you can keep some money in your pockets.

I reached out to ProSledge and I was able to score a 5% coupon code.

Click the red button below to reveal the discount code.

ProSledge Weight Vest Alternatives

Brute Force Training Weight Vest 3.0

The Brute Force Training weight vest 3.0 is one of my favorite vests because it fits around my torso like a glove.

It uses thick velcro bands that allow my rib cage to expand so I don’t feel like I can’t breathe.

And there’s plenty of arm room where my shoulder range of motion is not being limited.

With a bunch of pockets in the front and back, I can easily adjust the weight of the vest up to 40 lbs.

Kensui EZ-Vest Max V2

The Kensui EZ Vest Max V2 weight vest uses loading bars that screw to the front and back of the vest to add Olympic weight plates.

I can load this weight vest up to 300 lbs making it one of the heaviest loaded weight vests around.

This one is $299 and does not include any weights.

UnbrokenShop Weight Vest

The UnbrokenShop weight vest is one of the most affordable weight vests (under $100) that I load with weight plates.

It has a pouch in the front and back that secures weight plates with Velcro and can be loaded up to 40 lbs.

My Experience Using the ProSledge Weight Vest

I like the ProSledge weight vest and use it mainly for pull ups, dips, and rucking.

For the majority of people, the half vest is more than enough weight if you only plan to use it for upper body exercises.

Although I don’t use it much for lower body exercises, I do like having the option to load it up with 106 lbs for exercises like squats and lunges.

When it comes to running and box jumps, it does have some bounce so I don’t like using it for those exercises.

Conclusion: Is The ProSled Weight Vest Worth It?

The ProSled vest is on the high end but it is made with quality materials and comes with the weights included.

I like having the ability to go up in 3 lbs increments so I can progressively overload and measure progress.

For most people using the vest for upper body exercises, the half vest will provide plenty of weight.